Eleaf iStick Mix 160W Kit

  • R 1,170.00


Eleaf presents their newest mix to the iStick Family; the iStick Mix box mod and ELLO POP Sub-Ohm Tank. Form fitting and appealing with resin and artistic design, the iStick Mix features exchangeable resin panels that matches the drip tip of the new ELLO POP. Another matching feature between the iStick Mix and the ELLO POP is the unique utilization of silicone rings on the bubble glass tank section. Together or by themselves, the iStick Mix and ELLO POP is surely something that every Vapers should look out for.

Starting off with the iStick Mix, this device features curved designs with both panels featuring amazing designs. This curved design allows for a more comfortable grip when vaping this device. On the side, the oversized firing button, OLED screen, and adjustment buttons are laid out horizontally. This configuration allows users to easily navigate their device with one hand. For a more comfortable view, the OLED screen measures at 1.3 inches, allowing Vapers to view essential data clearly. Each data viewed stems from the Stable Avatar Chipset; This chipset allows the iStick Mix to go from 1 to 160W, regulating an atomizer resistance to 0.05 to 3.0 ohm, and a full temperature control suite. In addition, the Stable Avatar Chipset presents multiple protections ranging from over-charge, over-discharge, over-current, short circuit, reverse polarity protection, and preventing the device from firing for over 10 seconds. This device requires dual high amperage batteries to operate (sold separately), each housed behind the magnetic resin panel and can be charged directly through the USB type-c for an added convenience. 

Included with in the Kit is the newest ELLO POP Sub-Ohm Tank. This unique sub-ohm tank feature silicone rings wrapped against the bubble glass, adding protection from accidental hits or drops. The base of the ELLO POP measures at 26.5mm however, the bubble glass extends the maximum diameter to 28mm. With this expansion, the ELLO POP can accommodate a whopping 6.5ml of vape-liquid. A unique child proof lock has been implemented on the ELLO POP, users are now required to slightly pull the top of the tank up and push forward, thus exposing the large fill port. Airflow enters this Sub-Ohm Tank through dual large airflow slots, each measuring at 14mm by 3mm, and each being able to be adjusted fully. Internally, the ELLO POP utilizes the well known HW coil family. Included are the HW-M2 and the HW-N2; The HW-N2 a 0.2 ohm coil head that utilizes a net style coil configuration with a 40 to 90W output setting. The HW-M2 shares the same 0.2 ohm rating however the mesh coil has the standard multi-hole configuration, while retaining the 40 to 90W output setting. 

The iStick Mix by Eleaf is an amazing device for starters, especially if it is paired with the ELLO POP Sub-Ohm Tank. Both work unanimously without drawbacks.


MOD SPECIFICATIONS
  • Stable Avatar Chipset
    • 1 to 160W
    • 0.05 to 3.0 ohm Atomizer Resistance Range
  • Temperature Control Suite
    • Ni200 Nickel Support
    • Titanium Support
    • SS316 Support
    • TCR (M1, M2, M3)
    • 0.05 to 1.5 ohm Atomizer Resistance Range
  • 1.3 Inch OLED Screen
    • Temperature Mode and Output
    • Output Power
    • Atomizer Resistance
    • Battery Life Indicator
    • Output Voltage
  • Three Button Control Interface
    • Oversized Firing Button
    • Adjustment Buttons Located on the Bottom
  • Magnetic Battery Door Access Door
    • Accepts Dual High Amperage 18650 Batteries
    • Batteries Sold Separately
  • USB Type-C Charging Port
    • Firmware Upgradeable
  • Stainless Steel 510 Threading
    • Accommodates Up to 26mm Atomizer Diameter
  • Gold Plated Contact
  • Overcharge Protection/Over Current Protection/ Over-Discharge Protection/Reverse Polarity Protection
    Product Dimension:
  • 52mm by 27mm by 83mm
  • ATOMIZER SPECIFICATIONS
    • 26.5mm Base Diameter
      • 28mm With Bubble Glass
    • 6.5ml Tank Capacity
      • 2ml Standard Glass Capacity
      • Silicone Ring Protectors On Glass
    • Pull Up and Push Fill System
      • O-Ring Sealed
        • Interchangeable
    • HW Coil Family
      • HW-N2
        • 0.2 ohm
        • 40 to 90W
        • Net Coil
        • Kanthal
      • HW-M2
        • 0.2 ohm
        • 40 to 90W
        • Multihole Coil System
        • Kanthal
    • Dual Adjustable Bottom Airflow
      • 14mm by 3mm Each Airslot
    • 8mm Wide Bore 810 Drip Tip
    PRODUCT INCLUDES
    • One Eleaf iStick Mix
    • One ELLO Pop Sub-Ohm Tank
    • One Spare 6.5ml Bubble Tank
      • Non-Silicon Ring
    • One HW-M2 0.2 ohm Coil Head
      • Pre-Installed
    • One HW-N2 0.2 ohm Coil Head
    • One QC3.0 USB Cable
    • Spare Parts Bag
    • Two User Manuals